YS-ZB-5040B Shrink Wrapper

Shrink wrapping machine Working principle Under point action, step on the pedal, cutting film frame closure, the bags are sent by belt conveyor to heat Shrink wrapping machine, Continuous operation, put the packaging and film following with the above method on the belt, the continuous packing can be achieved .

Operation method (according to our machine interface to select the button)
1. Open air compressor power switch to the normal work, adjust the deliver pressure about 5 kg -7 kg / cm ², sealing knife upward rises.
2. Determine exigency stop button is in the open state, then turn on the power switch (1)
3.Set 5 instrument to a certain value, suggest that temperature control instrument at 160 ℃, manual cutting film instrument time is about 1s, the heating time for the instrument is about 0.6s, and automatically cutting film instrument is based on individual operating speed, belt running time is determined by object size and weight of them.
4. Start-up wind machine (2) and heating button (4)
5. As temperature reaches enactment, press start button (9)
6. Objects will be set with the above-mentioned method in film, and then adjust the height of the belt to make horizontal level of knife in the middle of objects, press pedal switch
7. According to the packing objects, adjust four numerical instrument except automatically cutting film time, through repeated tests which determine the final four instruments suitable numerical value.
8. If continues packing, the first time determine automatically cutting film time, and then run automatically (3), to start work. (Note: this number at the first should be large, and then test several times, the operator knows about their objects speed, and then to the most appropriate time.)




YS-ZB-5040B Shrink wrapping machine

The machine produce under Italdibipack licnse

• Semiautomatic l-sealeer with shrink tunne "'combo" systems

Power supply3P+N                                : 230V/380V

Maximum power required                      : 5KW

Overall machine dimensions                 : W850 x L2200mm x H1500

Working plate height (on stand)             : 930mm

Tunnel entrance dimensions                 : 450 x230mm

Tunnel length                                         : 700mm

Machine weight                                      : 270kg

Sealing area                                           : W500mm x L 400mm

Maximum product height                       : 160mm

Impulse sealing system                         : top blade

Maximum roll width                                : 600mm

Compressed air consumption               : 1NI/cycle

Compressed air pressure                     : 6bar

Output                                                    : 15pcs/min

*Notes: Technical data subject to variations without prior notice Output depends on the operator and the type of the package










Label : mesin, alat, rokok, PR, pabrik rokok, industri rokok, mesin rokok, lem kardus, lem karton, alat lem kardus, alat lem karton, mesin lem kardus, mesin lem karton, segel, mesin segel, penyegel, mesin penyegel, BOPP, OPP, lakban, plakban, OPP tape, isolasi OPP, isolasi OPP tape, shrink, mesin shrink, shrink tunnel, plastic, OPP rokok, Plastik rokok, lem, kardus, karton, mesin pengemas, mesin kemas, mesin kemasan, mesin pabrik, mesin industri, shrink tunnel machine, 




http://www.mesin77.com






CONTACT PERSON :


MR. YANUARIUS BAYU : 081 615 68 03 03, 
081 252 160 260


MRS. MEISYA : 085 815 286 824, 0341-222 06 38
FAX: 0341-485152



OFFICE :


PERUM. PONDOK BLIMBING INDAH BLOK P6 NO.3
MALANG




BY: WWW.MESIN77.COM